Some Nvidia GeForce RTX 4090 graphics cards are having melting issues — meltdowns, if you will. Specifically, there have been a several reports that the 16-pin 12VHPWR adapters (used to convert multiple 8-pin PCIe power connectors to the new ATX 3.0 standard) that provide the power to the card have partially melted. In some cases, so has the 16-pin connector on the card itself.
It’s unclear how widespread of an issue this is. Don’t get us wrong — melting components are not safe. But there are, as of this writing, only fewer than 30 reports compared to what we imagine is a much larger pool of graphics cards. Nvidia has made a point of showing “lines around the block” for the 4090 (opens in new tab), and the fact that cards arestill hard to find suggests the company is selling everything it can make. In other words, while these incidents are very serious, they may be statistically rare.
Most of the melting reports are coming from anonymous users on social media, often on Reddit and other forums. These have included numerous models of the RTX 4090, including Nvidia’s own RTX 4090 Founders Edition.
Here’s what we know about the issues with the 16-pin 12VHPWR connector incidents so far.
What is happening?
Some RTX 4090 owners have reported that the 16-pin 12VHPWR power adapters have melted while plugged into their graphics cards (some also claim that the connectors have melted, too).
Several have written that their screens have gone black and that their fans started spinning heavily when this happened. Others have said they happened to check their connectors after reading about connector issues and found that theirs, too, had melted. Many have provided photos, but not much other information.
Several have said that they have heard from Nvidia or other card vendors after reporting their melting connector, or that they have received a replacement card.
On the r/nvidia subreddit, members have been keeping a “List of Confirmed Cases,” which counts 26 melting issues as of this writing (two of those were using ATX 3.0 PSUs and not the power adapter). An additional table of “Unconfirmed Cases” lists six more issues, which are questionable based on image quality, descriptions, or other possible damage.
Which GPUs are affected?
To date, the melting issues have occurred on a variety of RTX 4090 cards, including Nvidia GeForce RTX 4090 Founders Edition as well as cards from Asus, Galax, Gigabyte, Inno3D, MSI and Zotac.
As of this writing, we haven’t heard of any similar issues with the newer Nvidia GeForce RTX 4080, which uses the same 16-pin connector. That one, however, uses three 8-pin connectors, as opposed to the four 8-pin connectors on the RTX 4090. And it has a lower power rating of 320W compared to 450W.
None of the five RTX 4090 samples that Tom’s Hardware has used have shown any signs of problems with either the 16-pin adapter or connector. We do however make it a point to treat our cards with care, and that includes not plugging in and unplugging the 16-pin connector any more than necessary, as it’s officially only rated for 30 cycles.
What does the 16-pin 12VHPWR adapter do?
The long-running PSU standard, ATX 2.X, can’t deliver enough power over one connection to power the RTX 4090 and other high-wattage graphics cards. Indeed, there have been many cards with multiple 8-pin connectors over the last few years — various third-party RTX 3090 and 3080 family GPUs, as well as RX 6950, 6900, and 6800 XT GPUs have included three 8-pin connectors, and even four in a few rare cases.
ATX 3.0, which is slowly rolling out, is supposed to change that by delivering up to 600W over a single 16-pin 12VHPWR connector. But most people still have ATX 2.X PSUs in their systems, and ATX 3.0 PSUs are just now becoming available here and there. The adapter lets people use their existing power supplies and hook up multiple 8-pin connectors to the 16-pin connector on the RTX 4090 cards, providing enough wattage to these power-hungry GPUs.
Why are 16-pin connectors on RTX 4090 cards melting?
If anyone was sure, this would make everything a lot easier! There are, however, a lot of theories. We aren’t able to confirm any of them definitively, but here’s what we know. Buckle in.
Back in October, Igor’s Lab posted that the Nvidia’s adapter’s “build quality… is extremely poor[,]” and that the 12VHPWR connector isn’t inherently the issue. Igor’s Lab also suggested that manufacturers should be crimping, rather than soldering, joints in the adapters. Gamers Nexus, however, opened one of its adapters and found it more substantially soldered than the one Igor’s Lab had. Igor’s Lab had 16AWG 150V rated wires in its power adapter, while Gamers Nexus had a version with 14AWG and 300V rated wires.
Gamers Nexus couldn’t replicate the melting issues at first, despite mangling several adapters. It put up a poll for 4090 users where it appears less than 10% have the 16AWG 300V wires. More recently, Gamers Nexus published a video where it “successfully” caused at least one adapter to melt… by not plugging the connector in all the way and by putting strain on the cables.
In November, Jon Gerow, Corsair’s PSU expert (who used to publish power supply reviews under the pseudonym JohnnyGuru) weighed in, suggesting that owners aren’t fully inserting the connectors, and that a gap between the connector and the socket could be to blame. Soon after, Gerow quietly pulled the article, which he had self-published on his own site.
Initially, there were some concerns that the 12VHPWR connector could fail if the cables were bent in the wrong place. CableMod, a third-party cable manufacturer, published a “12VHPWR Cable Guide” claiming that it can’t be bent near the plug, and all bends should start at least 35mm from the connector. PSU manufacturer Be quiet! places that distance at 40 mm. This is difficult to do in most PC cases. It also suggested that people need to ensure they’re plugging in the cables completely.
Gabriele Gorla, director of engineering at Nvidia, told Igor’s Lab that two different companies, Astron and NTK, make the adapter that ships with each RTX 4090. It’s unclear if one maker is having more issues than the other.
Will a third-party cable help?
This is murky territory. In the box for the Nvidia GeForce RTX 4090 Founders Edition, the documentation reads:
“Use only the included PCIe Gen 5 compliant power connector adapter for your GeForce RTX 40-series Founders Edition graphics card. Use of non-compliant or third-party power connector adapters may cause technical issues, and may void your manufacturer warranty.”
It’s unclear whether third-party graphics card companies hold the same rules about warranties and third-party connectors.
We at Tom’s Hardware haven’t tried any third-party cables. ATX 3.0 PSUs should work, as those cables don’t require adapters for the 16-pin connector. However, there are still at least a couple of reports of direct PSU connections melting.
Some companies are already announcing new adapters for the GPU. CableMod, for instance, has a right angle adapter that it says requires less bending.
What has Nvidia said about all of this?
Nvidia has said little about the reports.
“We continue to investigate the reports, however, we don’t have further details to share yet,” the company told KitGuru in mid-November. “Nvidia and our partners are committed to supporting our customers and ensuring an expedited RMA process for them.”
What do I do if this happens to me?
If your adapter or card melts, you may see issues such as the screen going black or your fans spinning faster and louder than usual. We’ve seen one report where someone suggested they smelled plastic melting. If this happens, unplug your computer and check to see if there’s an issue. If there is, stop using the graphics cards and contact the manufacturer. They may want you to RMA (basically return and exchange) your card.
If it hasn’t happened to you, you may be fine! After all, far more RTX 4090’s have been sold than reports of melting. But it may also not be a bad idea to keep an extra eye on your system. That being said, don’t disconnect and reconnect your adapter more than is strictly necessary, either. Repeated stress could damage the connector and the system in other ways.
Could this lead to a lawsuit?
It already has. Lucas Genova is the plaintiff in a class action lawsuit against Nvidia that was filed on November 11, 2022. In the suit, Genova’s attorneys state that “Plaintiff and class members have been hit with a costly double-whammy: a premium purchase price (the MSRP is $1,599) for a dangerous product that should not have been sold in its current state.”
The suit, Lucas Genova v. Nvidia Corporation, is making its way through the United States District Court for the Northern District of California.
Are AMD’s cards having similar issues?
AMD doesn’t use 16-pin connectors–at least not yet. When it launches its next-gen GPUs, the Radeon RX 7900 XTX and 7900 XT, both will use dual 8-pin power connectors, which means that people won’t have to deal with adapters at all.
What about older cards with 12-pin adapters?
Interestingly, Nvidia has used a 12-pin precursor to the PCI-SIG 16-pin connector on the Founders Edition RTX 30-series cards. To our knowledge, no one reported any melting 12-pin adapters over the past two years. RTX 3090 Ti cards also use a 16-pin connector, but they still come with a 12-pin adapter cable.
The 16-pin connector is largely the same, but it adds four extra “sense pins” that can communicate with the power supply. In our experience, the 16-pin connector does require a bit more force to fully insert. Multiple theories suggest the root cause may be improperly inserted connectors, perhaps pulled out after doing some cable management. But there is no hard proof as yet that this is the only possible cause.
Bottom Line
We do not know precisely how many RTX 4090 cards have been sold that use the 16-pin 12VHPWR connector. There are also RTX 3090 Ti and RTX 4080 cards that also use the same connector. By that token, there could be hundreds of thousands of cards with 16-pin connectors now in the hands of consumers, and only a very few of those have failed — Gamers Nexus claims the graphics card companies are saying the failure rate is between 0.05% and 0.1% right now. So about one in a thousand to one in two thousand.
Officially, there’s no definitive report on the cause or the solution yet. If you have a card that uses a 12VHPWR connector, you’re probably safe to use it. Just ensure the connector is fully inserted and that it “clicks” into place. Maybe check the connector every so often (without disconnecting it) until we learn more. And If the worst should happen, contact the manufacturer for support.
If you don’t have a card that uses a 16-pin connector, it might be a good idea to sit back and continue to monitor the situation (and save your money, because these cards aren’t cheap). At some point, there should be an official statement released from Nvidia to shed more light on things. Perhaps by that time we’ll have several new additions to the best graphics cards for you to consider, including ones that don’t use a 16-pin connector.